The AC 700F controller, as a member of Freelance, has numerous advantages over a PLC based solution:
AC 700F can also be extended with Profibus Remote I/O units. In addition, field devices can be connected to AC 700F. Thanks to the flexibility of Ethernet and its small footprint, AC 700F can also be placed in junction boxes in non-hazardous areas out in the field as competitive, intelligent Ethernet I/O.
AC 700F OVERVIEW OF TECHNICAL DATA
Processor
Freescale PowerPC
Program memory (battery backed up)
2 MB SRAM
Internal memory
8 MB SDRAM, 4 MB FLASH ROM
Processing time for 1000 instructions
1.667 ms for binary instructions
2.322 ms for word instructions
3.125 ms for floating point instructions
SD card support
For controller backup and firmware update
Max. number of I/O modules per CPU
8
Power supply
CP-C 24 / 5.0, power supply, 5 A / 24 VDC output
CP-C 24 / 10.0, power supply, 10 A / 24 VDC output
Max. power dissipation within the module
10 W
Current consumption from 24 VDC
80 mA (max)
Inrush current at 24 VDC
1 A²s
Data backup source
Lithium battery
Data buffering time at 25 °C / 77 °F
Approximately 1.5 years
Battery low indication
Warning indication issued about 2 weeks before the battery charge becomes critical
Real-time clock, with battery backup
Yes
Multitasking program execution
Cyclic (equidistant)
Cyclic (as fast as possible)
Event driven
8 tasks
1 PLC type task
Upon any of these events: “Run, Stop, Warm start, Cold start, Error“
Dimensions, etc.
Width x height x depth (CPU without the Terminal Base) 67.5 x 76 x 54 mm / 2.66 x 2.99 x 2.13 inches
Weight (CPU without Terminal Base) 150 g / 5.29 oz
Mounting position horizontal or vertical with horizontal or vertical with de-rating (50 % output load, reduction of maximum temperature to 40°C/ 104°F
PM 783F 3BDH000364R0005
CI 773F 3BDH000395R0001
TB 711F 3BDH000365R0001
TA521 1SAP180300R0001